Factory Supply Conveyor Belt Weighing Systems - JJ-LIW BC500FD-Ex Dripping System – JIAJIA
Factory Supply Conveyor Belt Weighing Systems - JJ-LIW BC500FD-Ex Dripping System – JIAJIA Detail:
Function principles
The meter controller collects the weight signals of the measuring tank in real-time
Convert the weight per unit time into an instantaneous flow
PID controller calculates the instantaneous flow rate and the preset value
According to the PID algorithm results, the meter controller outputs 4-20mA analog signals to the regulating valve/inverter to make precise flow control
At the same time, the meter controller accumulates the weight of the material flowing out of the measuring tank. When the accumulated value is equal to the set value, the meter controller closes the valve/inverter and stops the dripping.
Features
Highlight display interface, simultaneously display instantaneous flow and cumulative total
Automatic feeding function
Remote, local switching, and manual and automatic control
Comprehensive status monitoring and chain alarm function
Real-time monitoring of sensor load, convenient for maintenance and troubleshooting
Can coordinate with DCS/PLC through the data bus
Standard RS232/485 dual serial ports, MODBUS RTU communication
Extendable a 4~20mA input and a 4~20mA output Optional Profibus DP interface
Features
Case 1: Weighing flowmeter
1. The weighing method is not affected by temperature, density, installation method, etc.
2. High measurement accuracy
3. No contact with materials, no cross-infection
Case 2: Automatic control of dripping by the instrument
1. Automatic drip control of the instrument
2. Quick setting of process parameters
3. On-site operation display, simple and intuitive
Case 3: Meter metering flow, DCS control dripping
1. The weighing method is not affected by temperature, density, installation method, etc.
2. The meter directly provides flow data, and DCS controls the process
3. Fast sampling frequency and high measurement accuracy
Case 4: DCS instruction, meter automatically controls dripping
1. Automatic dripping control
2. The instrument participates in the process
3. Reduce the cost of PLC/DCS software and hardware
Specification
Enclosure |
Cast Aluminum |
Run Mode |
Constant feeding, Material level Balancing, Batch feeding |
Signal Range |
-20mV~+20mV |
Max. Sensitivity |
0.2uV/d |
FS Drift |
3ppm/°C |
Linearity |
0.0005%FS |
Flowrate Unit |
kg/h, t/h |
Dec.point |
0, 1, 2, 3 |
Control Mode |
Zone Adj. / PID Adj. |
Max Quantity |
<99,999,999t |
Display |
128×64 Yellow-Green OLED display |
Keypad |
16 Flat switch membrane with tactile-feel keys; polyester overlay |
Discrete I/O |
10 Inputs; 12 Outputs(24VDC @500mA with over-load protection) |
Analog Output |
4~20mA/0~10V |
USART |
COM1: RS232;COM2: RS485 |
Serial Protocol |
MODBUS-RTU |
Power Supply |
100~240VAC,50/60Hz, <100mA(@100VAC) |
Operating Temperature |
–10°C ~ +40°C,Relative humidity:10%~90%,non-condensing |
Product detail pictures:
Related Product Guide:
New weights and their correct classification method
Why is there an error in weight calibration?
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Factory Supply Conveyor Belt Weighing Systems - JJ-LIW BC500FD-Ex Dripping System – JIAJIA , The product will supply to all over the world, such as: Swiss, Orlando, kazan, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality products and good after-sales services. Up to now, our products have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.
By Nancy from Romania - 2017.08.18 11:04
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Michelle from Slovenia - 2018.10.09 19:07