Accessories

  • Wireless Remote Displays-RDW01

    Wireless Remote Displays-RDW01

    Description Proname:1/3/5/8 (series Scoreboard) Auxiliary display for weighing device by viewing weighing result from long distance. Auxiliary display for weighing system by connecting with computer with matching output foRDat. Weighing indicator should be equipped with corresponding communication interface to connect with scoreboard. Standard function ◎Transmission by air: radio frequency 430MHZ to 470MHZ ; ◎Radio channel :8 frequency of the hardware , 100 frequency selectable by...
  • Wireless Weighing Display-RDW02

    Wireless Weighing Display-RDW02

    Description Proname:1/3/5/8 (series Scoreboard)Auxiliary display for weighing device by viewing weighing result from long distance. Auxiliary display for weighing system by connecting with computer with matching output foRDat. Weighing indicator should be equipped with corresponding communication interface to connect with scoreboard. Standard function ◎Transmission by air: radio frequency 430MHZ to 470MHZ ; ◎Radio channel :8 frequency of the hardware , 100 frequency selectable by ...
  • Explosion-proof Display-EXRD01

    Explosion-proof Display-EXRD01

    Features ◎Shell Material: Cast Aluminum; ◎Explosion-proof sign: Exd II BT6; ◎Input voltage: AC220V 50Hz; ◎Communication Interface: RS232C or 20mA Current Loop; ◎Display:3 inches or 5 inches optional; ◎Application: 1 and 2 zones of explosive gas environment, group IIB T6 gases; 21 zones and 22 zones of explosive dust environment.;
  • Wireless Transmitter-ATW-A

    Wireless Transmitter-ATW-A

    Energy conservation Weight stable for 10 minutes without changes, the system automatically enter to sleep mode for save energy; The system will automatic wake-up to enter to weighting mode When there are changes in 3-5 seconds. 1- DC charge port DC8.5V/1000Ma) Inner:+ Outside:- 2- Indicator light: It will light while working. 3- Load cell port: PIN1 E- Excitation- PIN2 S+ Signal+ PIN3 S- Signal- PIN4 E+ Excitation+ Description A/D conversio...
  • Wireless Load Cell Transmitter-AWT

    Wireless Load Cell Transmitter-AWT

    For AWT sender Accuracy 1/100,000 for load cell Input signal range -19.5mV ~ +19.5mV Connect Load cell 1 to 12 load cell Load cell excitation DC5V Load cell connection mode 4 wire Wireless Frequency 433MHZ~470MHZ Power supply Switch Rechargeable battery 7.4V / 2400mAh or 8.4V / 1A charger Red waterproof button,long press for turn on or shut down Antenna Elbow antenna, can swing up and down Led light It will twinkle when workin...
  • Wireless USB PC Receiver-ATP

    Wireless USB PC Receiver-ATP

    Software Installation instructions 1.When you Insert the USB port to PC,it will notice you to install the driver of USB to RS232, after installation , Computer will find a new RS232 port. 2.Run the ATP software, click “SETUP” button, you will enter to system setup form, choose the com port ,then click “SAVE” button . 3.Restart the software, You can find the red led is light and green light is flickering, that is ok. Description Interface USB (RS232) Communication protocol...